PO BOX 1294, Bundoora VIC 3083
1300 200 211

BIKE RACKS

We offer a wide range of single and multiple bicycle racks in three finishes, stainless steel, galvanised, and powder coated. Our design team can assist in selecting the best design and layout, which will optimise your bike storage area and also meet the Australian Standards.

The VERTIRACK is designed to store your bike vertically against a wall, which is ideal in basement carparks which have a compact bike storage area. Each bike rack suits one bike and features two prongs which cradles the bike wheel and allows the user to securely lock the wheel and bike frame directly to the VERTIRACK. The VERTIRACK is available in galvanised, stainless steel, and powder coated black finish

Dimensions:

715mm x 610mm

Packaging:

Six bike racks per box

Installation:

The VERTIRACK can be fixed to any solid wall or we can fix them to a metal frame. To order to get the most out of the VERTIRACK it is recommended to stagger the heights so you can reduce the spacing to as low as 375mm. When installing the VERTIRACK to a concrete wall we recommend 4 x 10mm masonry anchors, and when fixing to a metal frame we recommend 4 x tek screws

The CRADLE bike rack is usually installed directly above your car bonnet which provides a very convenient and compact storage solution for your bike. These are commonly used in apartment basement car parks which don’t have sufficient space for a designated bicycle park area. The CRADLE bike rack is available in the following finishes;

  • ‘Hot Dipped’ galvanised
  • Black Powder coat
  • Stainless Steel

Dimensions:

465mm x 600mm

Installation:

Each CRADLE bike rack suits one bike and requires 4 x 10mm masonry anchors

The MULTIRACK is a floor mounted bike rack which accommodates four bikes. It is assembled on a rail system which speeds up installation time. The bikes tire fits inside the cradle and the bike leans against the “P” shaped rail. The offset cradles allows you to fit the most number of bikes with the closest spacing i.e. 300mm. The MULTIRACK is available in galvanised, stainless steel, and powder coated finish

Specfication:

1200mm wide x 830mm high x 1052mm deep

Available finishes-

‘Hot Dipped’ galvanised

Black Powder coat

Stainless Steel

Packaging:

Flat pack some assembly required. One unit per box

Installation:

Each bike rack requires 6 x 10mm masonry anchors.

ARCHRACK bike rack

The ARCHRACK also known as a Hooped bike rack is a stylish curved rail which one or two bikes can lean against. There are two variations, base plated which is fixed to a concrete slab or a bellow ground version which is cast into a concrete footing. The ARCHRACK is available in three finishes; galvanised, stainless steel, and powder coated. 

Specfication:

850mm wide x 850mm high

Available finishes-

‘Hot Dipped’ galvanised

Black Powder coat

Stainless Steel

Packaging:

Two units per box

Installation:

Each bike rack requires 6 x 10mm masonry anchors

product banner