PO BOX 1294, Bundoora VIC 3083
1300 200 211

TACTILES

Tactile surface indicators are an essential requirement in all public buildings in order to comply with the Disability Discrimination Act (DDA). Tactiles assist the vision impaired in gaining access in public buildings and navigating their way around obstacles such as a stair cases, ramps, or a busy road.

Description:

The WAYFINDER tactile pad is a hard wearing anti-slip tactile indicator pad with a heavy duty self-adhesive backing. The studs are textured which greatly increases their slip-resistance and complies with AS/NZS 1428.4:2002. They are available in both studs and directional bars and in several different colours.

Product Code: Description
TACWAY S300 PVC Tactile pad with studs
TACWAY B300 PVC Tactile pad with directional bars

Colours:

  1. Black
  2. Ivory
  3. Yellow
  4. Light Grey
  5. Dark Grey
  6. Terracotta

Dimensions:

300mm x 300mm

Installation:

Simply peel the protective film away and stick the WAYFINDER tactile pad in the desired position. Typically located in the path of travel at the top and bottom of stair cases and ramps with a setback of 300mm

The WAYFINDER BLADED SHAFT tactile system features a unique Bladed shaft, which speeds up the installation time, and it also reduces the chance of popping out.

Product Code: Description
TACWAY SBD PVC Individual tactile indicator studs on a bladed shaft
TACWAY BBD PVC Individual tactile indicator bars on a bladed shaft

Colours:

  1. Black
  2. Ivory
  3. Yellow
  4. Light Grey
  5. Dark Grey
  6. Terracotta

Installation:

Saw-cut a groove in the substrate and then knock the shaft into the groove with a rubber mallet. Typically located in the path of travel at the top and bottom of stair cases and ramps with a setback of 300mm.

The WAYFINDER individual tactile indicators are installed individually. The PVC tactiles are installed into a pre-drilled hole by knocking the stud or bar by using a rubber mallet. The individual stainless steel indicators are glued into the pre-drilled holes using a heavy duty epoxy adhesive, which makes this the most superior option, for its aesthetics and durability.

Product Code: Description
TACWAY SPVC Individual tactile indicator studs – PVC
TACWAY BPVC Individual tactile indicator bars – PVC
TACWAY SS Individual tactile indicator studs – Stainless Steel
TACWAY BSS Individual tactile indicator bars – Stainless Steel

Colours:

  1. Black
  2. Ivory
  3. Yellow
  4. Light Grey
  5. Dark Grey
  6. Terracotta

Individual stainless steel tactile indicator studs or bars welded to a stainless steel plate. Typically used when drilling into the substrate is not an option, i.e. top and bottom of escalators

Product Code: Description
TACWAY SP Individual tactile indicator studs welded to a stainless steel plate – Stainless Steel
TACWAY BP Individual tactile indicator bars welded to a stainless steel – Stainless Steel